Materials Packages

COMPLETE MATERIALS BUILDING SYSTEM ~ “A”

DAYLIGHT WALL MATERIALS: (if applicable)

  • 2x PT Sill plate w/sill seal
  • 2×6 KD plates & studs 16” O.C.
  • 2×10 KD door & window headers
  • OSB wall sheathing and TYPAR
  • Log Siding

SUBFLOOR MATERIALS:

  • 2x PT Sill plate w/sill seal
  • Lally columns or 6×6 PT subfloor support posts
  • 2x KD Double boxsill
  • 2×12 KD Triple subfloor girder beam & 2×10 KD Floor joists
  • Metal joist bridging and hangers
  • “Advantech” T&G subfloor sheathing w/construction adhesive

EXTERIOR WALL MATERIALS:

  • Western Red Cedar Or Kiln-dried Pine pre-cut & numbered wall and gable logs
  • Log siding for skirt board, daylight walls, dormers & garages
  • False log corners at skirt board
  • Pre-cut and routered door and window bucks
  • 2x Radius edged pine exterior door and window trim
  • Caulk, foam gasket, pre-cut hardwood dovetail splines and “Log Hogs”
  • 6×6 posts, strongbacks & corner posts

INTERIOR FRAMING:

  • 2×6 KD Bearing wall framing & studs 16” O.C.
  • 2x KD Non-load bearing wall plates, studs & headers
  • 1×6 T&G Pine for wall sheathing, soffits and dormers
  • R-19 Fiberglass insulation @ exterior framed walls (dormers, boxsill & daylight)

INTERIOR FINISHES:

  • 6-panel Interior doors w/hardware, pine bi-fold doors w/hardware
  • 1x Pine interior door, window & baseboard trim
  • Closet rods & brackets (shelving not included)

INTERIOR STAIRS & RAILING SYSTEMS:

  • 2×12 KD stair stringers and treads (basement)
  • 2×12 KD and Southern Yellow Pine Risers & Treads (2nd floor)
  • ۬۬6 Hand rail w/brackets
  • 4×6 Rails & Posts w/2×2 balusters
EXTERIOR WINDOWS & DOORS:

  • Andersen 400 Series windows w/screens (specify hardware)
  • Andersen patio doors w/screens (bright brass hardware)
  • Jeld-Wen fiberglass entry doors (bright brass hardware)

LOFT MATERIALS:

  • 6×12 loft carry beams (if applicable)
  • 4×8 Loft joists
  • 2×6 T&G Spruce decking

ROOF MATERIALS (MAIN & PORCH):

  • Collar ties and blocking (as required)
  • R-38 High Density 2X12KD Rafters
  • 5/8” OSB sheathing
  • 1×6 Pine T&G ceiling and soffit sheathing w/2 layers-15#
  • felt paper, ice/water shield (as required) and 30yr. architectural shingles
  • Drip edge, flashing, soffit and ridge vent
  • 4×8 Porch rafters, carry beams & 4×6 porch posts
  • 2×6 T&G Spruce decking @ porch roof

DECKS:

  • 6×6 PT Posts (6’)
  • 2x PT Deck Framing
  • Copper back flashing, bolts & washers
  • 4×6 Rails & Posts w/2×2 balusters
  • 5/4 Cedar Decking

GARAGE: (if applicable)

  • 2×4 KD Framing
  • 7/16 OSB Sheathing (walls)
  • 5/8 OSB Sheathing (roof)
  • Standard Factory Trusses

MISCELLANEOUS:

  • “Sikkens” Exterior Stain
  • “Symphony” Interior Finish
  • Blueprints & Construction Manual

WEATHER-TIGHT SHELL ~ ”B”

DAYLIGHT WALL MATERIALS: (if applicable)

  • 2x PT Sill plate w/sill seal
  • 2×6 KD plates & studs 16” O.C.
  • 2×10 KD door & window headers
  • OSB wall sheathing and TYPAR
  • Log Siding

SUBFLOOR MATERIALS:

  • 2x PT Sill plate w/sill seal
  • Lally columns or 6×6 PT subfloor support posts
  • 2x KD Double boxsill
  • 2×12 KD Triple subfloor girder beam & 2×10 KD Floor joists
  • Metal joist bridging and hangers
  • “Advantech” T&G subfloor sheathing w/ construction adhesive

EXTERIOR WALL MATERIALS:

  • Western Red Cedar or Kiln-dried Pine pre-cut & numbered wall and gable logs
  • Log siding for skirt board, daylight walls, dormers & garages
  • False log corners at skirt board
  • Pre-cut and routered door and window bucks
  • 2x Radius edged pine exterior door and window trim
  • Caulk, foam gasket, pre-cut hardwood dovetail splines and “Log Hogs”
  • 6×6 posts, strongbacks & corner posts

INTERIOR FRAMING:

  • 2×6 KD Bearing wall framing & studs 16” O.C

EXTERIOR WINDOWS & DOORS:

  • Andersen 400 Series windows w/screens (specify hardware)
  • Andersen patio doors w/screens (bright brass hardware)
  • Jeld-Wen fiberglass entry doors (bright brass hardware)

LOFT MATERIALS:

  • 6×12 loft carry beams (if applicable)
  • 4×8 Loft joists
  • 2×6 T&G Spruce decking

ROOF MATERIALS (MAIN & PORCH):

  • Collar ties and blocking (as required)
  • R-38 High Density 2X12 KD Rafters
  • 5/8” OSB sheathing
  • 1×6 Pine T&G ceiling and soffit sheathing w/2 layers-15# felt paper, ice/water shield (as required) and 30yr.
  • architectural shingles
  • Drip edge, flashing, soffit and ridge vent 4×8 Porch rafters, porch carry beams, 4×6 porch posts
  • 2×6 T&G Spruce decking @ porch roof

MISCELLANEOUS:

  • “Sikkens” Exterior Stain
  • Blueprints & Construction Manual

LOG & TIMBER PACKAGE ~ “C”

EXTERIOR WALL MATERIALS:

  • Western Red Cedar or Kiln-dried Pine pre-cut & numbered wall and gable logs
  • Log siding for skirt board, daylight walls, dormers & garages
  • False log corners at skirt board
  • Pre-cut and routered door and window bucks
  • 2x Radius edged pine exterior door and window trim
  • Caulk, foam gasket, pre-cut hardwood dovetail splines
  • and “Log Hogs”
  • 6×6 posts, strongbacks & corner posts

LOFT MATERIALS:

  • 6×12 loft carry beams
  • 4×8 Loft joists with hangers

ROOF MATERIALS:

  • 4×8 Porch rafters, porch carry beams, 4×6 porch
  • Posts
  • Collar ties and blocking (as required)

TIMBER Series

COMPLETE MATERIALS BUILDING SYSTEM ~ “A”

DAYLIGHT WALL MATERIALS: (if applicable)

  • 2x PT sill plate w/sill sea
  • 2×6 KD plates & studs 16″ O.C.
  • 2×10 KD door & window headers
  • OSB wall sheathing and TYPAR
  • Siding

SUBFLOOR MATERIALS:

  • 2x PT sill plate w/sill seal
  • Lally columns or 6×6 PT sub-floor support posts
  • SIP insulated panel band joist
  • 2×12 KD Triple sub-floor girder beam & 2×10 KD Floor joists
  • Metal joist bridging and hangers
  • “Advantech” T&G sub-floor sheathing w/construction adhesive

EXTERIOR WALL MATERIALS:

  • R-25 Poly-Iso 4½” structural panel, pre-cut & numbered wall and gable Panels w/Western Red Cedar Or Kiln-dried Pine Siding. (A variety of horizontal or vertical sidings & shakes are available)
  • Siding for skirt board, daylight walls, dormers & garages
  • Corner boards or False log corners at skirt board
  • KD framing for door and window bucks & perimeter plates and nailers.
  • Western Red Cedar or Pine exterior door and window trim & fascia
  • 6×6 Pine Frame
  • Caulk, foam gasket, Plywood splines, Spray foam

INTERIOR FRAMING& FINISHES:

  • 2×6 KD bearing wall framing & studs 16″ O.C.
  • 2×4 KD non-load bearing wall, studs
  • 2x KD plates & header
  • 1×6 T&G Pine and/or drywall for wall sheathing, soffits and dormers
  • R-19 fiberglass insulation @ exterior framed walls (dormers, boxsill & daylight, if applicable) or SIPS
  • 6-panel interior doors w/hardware, pine bi-fold doors w/hardware
  • 1x Pine interior door, window & baseboard trim, closet rods & brackets

INTERIOR STAIRS & RAILING SYSTEMS:

  • 2×12 KD stair stringers and treads (basement)
  • 4×12 stair stringers and treads (2nd floor)
  • 1¼x16 hand rail w/brackets
  • 4×6 Rails & Posts w/2×2 balusters
EXTERIOR WINDOWS & DOORS:

  • Andersen 400 Series windows w/screens (specify hardware)
  • Andersen patio doors 2/screens (bright brass hardware)
  • Jeld-Wen fiberglass entry doors (bright brass hardware)

LOFT MATERIALS:

  • 6X12 loft carry beams (if applicable)
  • 4×8 loft Joists
  • 2×6 T&G Spruce decking

ROOF MATERIALS (MAIN & PORCH):

  • Collar ties and blocking (as required)
  • R-38 SIP Poly-Iso structural 6½” pre-cut & numbered Roof Panel w/2x KD perimeter nailer, ½” plywood splines & spray foam
  • 1×6 Pine T&G ceiling and soffit sheathing w/Top Guard water shield, 1×3 strapping & screw down metal roofing
  • Soffit and ridge vent
  • 4×8 porch rafters, carry beams & 4×6 porch posts
  • 2×6 T&G Spruce decking @ porch roof

DECKS:

  • 6×6 PT posts (6′)
  • 2x PT deck framing
  • Copper back flashing, bolts & washers
  • 4×6 rails & posts w/2×2 balusters
  • 5/4 Cedar decking

GARAGE: (if applicable)

  • 2×4 KD framing
  • 7/16 OSB sheathing (walls)
  • 5/8 OSB sheating (roof)
  • Standard factory trusses

MISCELLANEOUS:

  • “Sikkens” exterior stain
  • “Symphony” interior stain
  • Blueprints & Construction Manual

WEATHER-TIGHT SHELL ~ ”B”

DAYLIGHT WALL MATERIALS: (if applicable)

  • 2x PT sill plate w/sill seal
  • 2×6 KD plates & studs 16″ O.C.
  • 2×10 KD door & window headers
  • OSB wall sheathing and TYPAR
  • Siding

SUBFLOOR MATERIALS:

  • 2x PT sill plate w/sill seal
  • Lally columns or 6×6 PT sub-floor support posts
  • SIP insulated panel band joist
  • 2×12 KD Triple sub-floor girder beam & 2×10 KD floor joists
  • Metal joist bridging and hangers
  • “Advantech” T&G sub-floor sheathing w/construction adhesive

EXTERIOR WALL MATERIALS:

  • R-25 Poly-Iso 4 ½” structural panel pre-cut & numbered wall and gable panels w/ Western Red Cedar or Kiln-dried Pine Siding. (A variety of horizontal or vertical sidings & shakes are available).
  • Siding for skirt board, daylight walls, dormers & garages
  • Corner boards or false log corners at skirt board
  • KD framing for door and window bucks & perimeter plates and nailers.
  • Western Red Cedar or Pine exterior door and window trim & fascia
  • 6×6 posts & corner posts
  • Caulk, foam gasket, plywood splines, spray foam

INTERIOR FRAMING:

  • 2×6 KD bearing wall framing & studs 16″ O.C
EXTERIOR WINDOWS & DOORS:

  • Andersen 400 Series windows w/screens
  • (specify hardware)
  • Andersen patio doors w/screens (bright brass
  • hardware)
  • Jeld-Wen fiberglass entry doors (bright brass
  • hardware)

LOFT MATERIALS:

  • 6×12 loft carry beams (if applicable)
  • 4×8 loft joists
  • 2×6 T&G Spruce decking

ROOF MATERIALS (MAIN & PORCH):

  • Collar ties and blocking (as required)
  • R-38 SIP Poly-Iso Structural 6 ½” pre-cut & numbered
  • Roof panel w/ 2x KD perimeter nailer, 1/2″ plywood splines & Spray foam.
  • 1×6 Scandinavian-Pine T&G ceiling and soffit sheathing w/ Top Guard water shield, 1×3 strapping & screw down metal roofing.
  • Soffit and ridge vent
  • 4×8 porch rafters, carry beams & 4×6 porch posts
  • 2×6 T&G Spruce decking @ porch roof

MISCELLANEOUS:

  • “Sikkens” exterior stain
  • Blueprints & Construction Manual

PANEL & TIMBER PACKAGE ~ “C”

EXTERIOR WALL MATERIALS:

  • R-25 Poly-Iso structural 4 ½” pre-cut & numbered wall and gable panels
  • Foam gasket, plywood splines

LOFT MATERIALS:

  • 6×12 loft carry beams
  • 4×8 loft joists with hangers
  • 2×6 T&G Spruce decking

ROOF MATERIALS:

  • Collar ties and blocking (as required)
  • R-38 SIP Poly-Iso structural 6 ½” pre-cut & numbered roof Ppanel w/ 1/2″ plywood splines
  • 4×8 porch rafters, carry beams & 4×6 porch posts
  • 2×6 T&G Spruce decking @ porch roof